Menu 7 - Special Features; Remote Control Open Only; Holiday Mode; Energy Saving Mode - Elsema Eclipse MCS Setup Manual

Menu 7 – Special Features
The control card has many special features that can all be customised to your specific application.
Menu No.
7.1

Remote Control Open Only

7.2
7.3
7.4 Automatic Stop/Open on Closing
7.5 Receiver Channel 2 Options
7.6 Press and Hold for Open Input
7.7 Press and Hold for Close Input
7.8
7.9
7.10
7.1 Remote Control Open Only
By default the remote control allows the user to open and close the gate/door. In public access areas user
should only be able to open the gates/doors and not worry about closing it. Usually the auto close is used
to close the gate/door. This mode disables closing for the remote controls.

7.2 Holiday Mode

This feature disables all the remote controls.

7.3 Energy Saving Mode

This puts the control card to very low standby current that reduces your electricity bill while still
maintaining normal functions and operations.

7.4 Automatic Stop / Open on Closing

By default if the gate/door is closing and a push button or remote control is activated, it will automatically
stop and open the gate/door. When this feature is disabled then the gate/door will stop on an activation of
the push button or remote control.
22
Special Features
Holiday Mode
Energy Saving Mode
Window / Louvre
Reserved
Exit
Factory
Default
Off
Off
Off
On
Off Off / Light / Pedestrian Access
Off
Off
Off
Gate & Door Controller with Eclipse
Adjustable
Off/On
Off/On
Off/On
Off/On
Off/On
Off/On
Off/On
Operating System (EOS)
®