Installation Setup Mode #3 - LG AC Ez Installation & Owner's Manual

Installation setup mode #3 _ Group 2 product Select & Group Number Setting
This function is used for setting the product type and group number of group 2.
1
If pressing
- If pressing once shortly, it doesn't enter into installer setup mode. Please press
more than 5 seconds for sure.
2
If entering into product and group number setup mode of group 2 by using
button, it indicates as picture below. It shows on #3 of setup mode by blinking the
on/off led of indoor #3.
3
Select the product type of group 2 by pressing
4
Select the group number of group 2 by pressing
5
Save the product type and group number of group 2 by pressing
After pressing
group number stops blinking.
NOTE
!
• After setting, if you press the
onds, it exits from installation mode automatically.
• If you exit installation mode without pressing
• If you press individual on/off button of corresponding installation mode to change, you can
enter corresponding installation mode directly.
button long for 5 seconds, it enters into AC Ez setup mode.
Product type
Group number
button, corresponding setting condition is saved, group type and
button or it doesn't have any button input for 20 sec-
INSTALLATION INSTRUCTION
button.
button.
button, changed value don't apply.
17
button.