Vane Angle Control; Child Lock; Wlan Module Access Point Mode; Heater - LG PREMTC00U Owners & Installation Manual

OPERATION INSTRUCTIONS - Sub Function
16

Vane angle control

This function is to adjust airflow angle.
1
Press button for 3 seconds.
2 Press button to move the vane angle
control mode.
3
Press button to select indoor unit
vane. (1,2,3,4,All)
4 Press button to change the vane angle.
(P1 ~ P6)
5
Press button to set vane angle.
6
Press button for 3 seconds.
P1
P2
P3
P4
P5
P6

Child lock

It is the function to prevent children or others
from careless using.
1
Press button and botton for 3
seconds, you can operate child lock.
2
As for the releasing method, press
button and botton for 3 seconds.
h At the time of initial setting of the 'Child
Lock', the 'CL' will be indicated approx. 3
seconds at the temperature display section
before resuming to the previous mode.
h After the setting of the 'CL', if another
button is setup, the button can not be
recognized as the 'CL' is indicated at the
temperature display section for approx. 3
seconds.
WLAN module access point
mode
It is the function to operate WLAN (Wireless
LAN) module connected to the product in
access point mode.
OPERATION INSTRUCTIONS - Sub Function
1
Press button for 3 seconds.
2
Press button to move the WLAN
module access point mode.
3
While WLAN module is operating in
access point mode, the term of 'AP' blinks
on the screen of wired remote controller.
4
Press button for 3 seconds.
h This function is only available for select
models that support the WLAN Module.
h Refer to the installation manual of indoor
unit whether available or not.

Heater

It is the function to reinforce the heating
capability by turning on the electric heater
during the heating operation.
17
1 Press button for 3 seconds.
2
Press button to move the heater
mode.
3
Press button to select heater mode
'on/off'
4
Press button for 3 seconds.
h This function may not work in some
products.

Mode lock button

This function prevents changes to mode
setting.
1 Press button and button
simultaneously for 3 seconds to use mode
lock.
h If you press the
button while mode
lock is in use, the following screen appears.
h As for the releasing method, press
button and botton for 3 seconds.