INSTALLATION INSTRUCTION
20
Checking mode _ Confirmation of connected indoor unit
1
Select the group to control and display by pressing "GROUP SELECT" button. When
pressing "GROUP SELECT" button, Group 1 and Group 2 is changed in turn.
2
When pressing the
sponding individual on/off led of connected indoor unit 5 times.
Checking mode _ Confirmation the set group address
1
Select corresponding group to want to confirm the group number by pressing "GROUP SELECT"
button. When pressing "GROUP SELECT" button, Group 1 and Group 2 is changed in turn.
2
Select "GROUP" selection of control selection mode by pressing
When selecting group selection mode, it displays "GROUP" icon of LCD and group
number of corresponding group in "88" seg of LCD
Ex) If you setup group number to "0" in installation mode, it displays group number to "1" in
normal group selection condition.
button, it indicates connected indoor units by blinking corre-
C The group number displays group number + 1 of set corresponding
group in installation mode. (group number setting : 0~F, group number
display : 1~16)
button.