Installation Setup Mode #4; The Connected Indoor Unit (Master Only) - LG AC Ez Installation & Owner's Manual

INSTALLATION INSTRUCTION
18
Installation setup mode #4 _ Searching the Connected indoor unit (Master Only)
This function is searching connected indoor unit. This function can use only AC Ez controller of
set Master.
After central address setting of indoor unit and auto-addressing of outdoor unit, start searching
the connected indoor unit. If you don't do it before, it might not search the connected indoor unit
normally.
1
If pressing
- If pressing once shortly, it doesn't enter into installer setup mode. Please press
more than 5 seconds for sure.
2
If entering into searching mode of connected indoor unit by using
dicates as picture below.
3
After pressing
individual on/off led is blinking by rotation and
NOTE
!
• After setting, if you press the
onds, it exits from installation mode automatically.
• If you exit installation mode without pressing
• If you press individual on/off button of corresponding installation mode to change, you can
enter corresponding installation mode directly.
button long for 5 seconds, it enters into AC Ez setup mode.
button, searching the connected indoor unit starts.
button or it doesn't have any button input for 20 sec-
of LCD is blinking.
SEARCH
button, changed value don't apply.
button, it in-