Installation Setup Mode #5 - LG AC Ez Installation & Owner's Manual

Installation setup mode #5 _ Celsius/Fahrenheit Switching
To change temperature display type from Celsius to Fahrenheit and vise versa
1
If pressing
- If pressing once shortly, it doesn't enter into installer setup mode. Please press
more than 5 seconds for sure.
2
If entering into Celsius/Fahrenheit switching mode by using
as picture below.
It shows on #5 of installation setup mode by blinking the on/off led of indoor #5.
When entering the Celsius/Fahrenheit switching mode , it displays '05' and blinks '°C'
or '°F' in LCD.
3
Select temperature display method either °C or °F by pressing
4
Setup the selected temperature display method by pressing
After pressing
It displays set temperature display method on operation condition.
button long for 5 seconds, it enters into AC Ez setup mode.
button, corresponding setting is saved.
➭
INSTALLATION INSTRUCTION
button, it indicates
button.
button.
➭
19