Operating & Maintaining the Eden 3-D Printer
It is recommended that you use this opportunity to also clean the roller and
the UV-lamp lens (to the right of the print heads).
10. When you have finished cleaning, select the confirmation check box in
11. Remove the cleaning materials from the printer and close the cover.
12. Select the confirmation check boxes in the wizard screen and click
13. Click
7–16
Figure 7-21:Cleaning the heads
the wizard screen (see figure 7‐20) and click
Next
.
The heads are purged. When this is complete, the final wizard screen
appears.
Figure 7-22:Head cleaning wizard—final screen
Done
to close the wizard.
Next
.
DOC-22000 Rev. A