Stratasys Eden250 User Manual page 51

To revert to the shaded view:
To display objects as boxes, showing their maximum dimensions
instead of the model geometry:
To display the area around objects needed for support material (to
produce a matte finish):
To change the display color of an object:
1. Select the object.
2. From the Object menu, select
3. Select a color from the color palette and click
DOC-22000 Rev. A
Figure 5-23: Tray and model displayed in Wire frame view
View > Shaded
Select or click the Shaded icon
View > Display Bounding Box
Select
Figure 5-24: Model displayed with bounding box
View > Display Thickening Box
Select
Figure 5-25: Model displayed with thickening box
Its color changes to blue, indicating that the object has been selected.
Eden250 User Guide
.
.
.
Fill Color
or click the Fill Color icon
OK
.
.
5–17