Table of Contents
Advertisement
2. In the Shutdown Wizard dialog box, click
3. In the next wizard screen, verify that the tray is empty and click
4. When completely shutting down the Eden printer and turning the
5. After the Eden computer shuts down, turn off the switch that controls
DOC-22000 Rev. A
The shutdown procedure begins, and the steps of this procedure are
displayed in the dialog box that follows.
Figure 7-17:Shutdown dialog box, showing first step in the procedure
The Shutdown procedure may take up to 10 minutes while the
following tasks are performed:
a. The printing block returns to its starting point on all axes.
b. The printing heads are heated.
c. The printing heads are cleared of any remaining material.
After these tasks are completed, the final wizard dialog box appears, in
which you choose whether or not to shutdown the computer in the
Eden printer.
Figure 7-18:Shutdown Wizard dialog box, showing last step in the procedure
Yes
power off, select
and click
the power outlet to which the Eden printer is connected.
Eden250 User Guide
Next
.
Next
.
Next
.
7–13
Advertisement
Table of Contents
