10. When prompted, insert the new cartridge of model material. Select the
11. When the final wizard screen appears, click
DOC-22000 Rev. A
The wizard clears the print heads and feed tubes of the cleanser. This
takes about 5 minutes.
Figure 7-13:Resin replacement (long cycle): clearing heads of cleanser
check box and click
Figure 7-14:Insert New Model Container screen
The Eden printer begins the process of filling the print heads with the
new model material. This may take up to 15 minutes.
Figure 7-15:Resin replacement: filling heads with new model material
CAUTION: Dispose of cartridges of Eden model and support material in
accordance with all applicable laws and regulations. If necessary, the
cartridges can be disassembled for recycling. If this is done, protect the
person handling the cartridges from direct exposure to uncured resins.
Next
.
Eden250 User Guide
Done
to close the wizard.
7–11