Procedures; Load And Activate A Departure Procedure; Activate A Departure Leg - Garmin CIRRUS PERSPECTIVE SR22T Reference Manual

LOAD AND ACTIVATE A DEPARTURE PROCEDURE

1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'SELECT DEPARTURE'.
3) Press the ENT Key. The cursor is displayed in the 'DEPARTURE' field with a
list of available departures.
4) Turn the large FMS Knob to highlight the desired departure.
5) Press the ENT Key. A list of runways may be displayed for the departure. If
so, turn either FMS Knob to select the desired runway.
6) Press the ENT Key. The cursor is displayed in the 'TRANSITION' field with a
list of available transitions.
7) Turn the large FMS Knob to highlight the desired transition.
8) Press the ENT Key.
9) With 'LOAD?' highlighted, press the ENT Key. The departure is active when
the flight plan is active.

ACTIVATE A DEPARTURE LEG

Activate leg using the Quick Select Box:
1) Press the FPL Key on the PFD/MFD Control Unit to display the active flight
plan.
2) Use the Joystick to move the Quick Select Box to the TO waypoint of the
desired leg within the departure.
3) Press the ACT LEG Softkey. A confirmation window showing the selected
leg is displayed.
4) With 'ACTIVATE' highlighted, press the ENT Key.
Activate leg using the cursor:
1) Press the FPL Key on the PFD/MFD Control Unit to display the active flight
plan.
2) Press the FMS Knob to activate the cursor.
190-00821-09 Rev. A
Cirrus Perspective

PROCEDURES

™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
Procedures
51