Garmin CIRRUS PERSPECTIVE SR22T Reference Manual page 92

Hazard Avoidance
L-3 Skywatch Traffic (Optional)
Switching from standby mode to operating mode:
1) On the Traffic Page, press the OPERATE Softkey or press the MENU Key and
turn the small FMS knob to select Operating Mode.
2) If using the FMS menu, press the ENT Key to place the SKY497 in the
operating mode.
3) To switch to Standby Mode from the Traffic Page, press the STANDBY
Softkey.
Testing the Traffic Advisory System:
1) Set the range to 2/6 nm to allow for full traffic test pattern display.
2) Press the STANDBY Softkey.
3) Press the TEST Softkey.
4) System test takes approximately eight seconds to complete. When
completed successfully, traffic symbols display and a voice alert "Traffic
Advisory System Test Passed" is heard. If the system test fails, the system
reverts to Standby Mode and a voice alert "Traffic Advisory System Test
Failed" is heard.
Displaying traffic on the Traffic Map Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Press the OPERATE Softkey to begin displaying traffic. OPERATING is
displayed in the Traffic mode field.
4) Press the ALT MODE Softkey to change the altitude volume.
5) Press the STANDBY Softkey to place the system in the Standby mode.
STANDBY is displayed in the Traffic mode field.
6) Turn the RANGE Knob clockwise to display a larger area or counter-
clockwise to display a smaller area.
74
Cirrus Perspective ™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-09 Rev. A