Garmin CIRRUS PERSPECTIVE SR22T Reference Manual page 166

Annunciations & Alerts
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message
VNV – Unavailable. Excessive track
angle error.
VNV – Unavailable. Excessive
crosstrack error.
VNV – Unavailable. Parallel course
selected.
NON WGS84 WPT – Do not use GPS
for navigation to [xxxx]
TRAFFIC FAIL – Traffic device has
failed.
STRMSCP FAIL – Stormscope has
failed.
FAILED PATH – A data path has
failed.
FAILED PATH – An autopilot servo
data path has failed.
SVS – SVS DISABLED: Out of
available terrain region.
SVS – SVS DISABLED: Terrain DB
resolution too low.
SCHEDULER [#] – <message>.
CHECK CRS – Database course for
LOC1 / [LOC ID] is [CRS]°.
CHECK CRS – Database course for
LOC2 / [LOC ID] is [CRS]°.
148
Cirrus Perspective
Comments
The current track angle error exceeds the limit,
causing the vertical deviation to go invalid.
The current crosstrack exceeds the limit,
causing vertical deviation to go invalid.
A parallel course has been selected, causing
the vertical deviation to go invalid.
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in
error as displayed. Do not use GPS to navigate
to the selected non-WGS84 waypoint.
The Perspective
from the traffic system. The traffic device
should be serviced.
Stormscope has failed. The Perspective
system should be serviced.
A data path connected to the GDU or the GIA
63W has failed.
A data path connected to an autopilot servo has
failed. Only available if GFC 700 is installed.
Synthetic Vision is disabled because the aircraft
is not within the boundaries of the installed
terrain database.
Synthetic Vision is disabled because a terrain
database of sufficient resolution (9 arc-second
or better) is not currently installed.
Message criteria entered by the user.
Selected course for LOC1 differs from published
localizer course by more than 10 degrees.
Selected course for LOC2 differs from published
localizer course by more than 10 degrees.
™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
™ is no longer receiving data
190-00821-09 Rev. A
™