Garmin CIRRUS PERSPECTIVE SR22T Reference Manual page 118

Additional Features
To connect the selected network without saving:
a) Turn the large FMS Knob to move the cursor to highlight 'CONNECT'.
b) Press the ENT Key.
To save and connect the selected network:
a) Press the ENT Key. A checkmark is placed in the checkbox and the
cursor moves to the airport field.
b) Using the FMS Knobs, enter an airport identifier to be associated with
the saved network. This aids in identifying the network later in the
event of duplicate network names.
c) Press the ENT Key. The cursor moves to 'CONNECT'.
d) Press the ENT Key again to connect to the selected network.
Editing a Saved Network
1) While viewing list of saved networks, press the FMS Knob to activate the
cursor.
2) Turn either FMS Knob to highlight the network to be edited.
3) Pressing the ENT Key at this point will check or uncheck the AUTO
CONNECT checkbox. When a checkmark is present, the system will
automatically connect to the network when within range.
4) Select the EDIT Softkey. The cursor now appears in the CONNECTION
SETTINGS window.
5) Turn the large FMS Knob to select the network attribute to be edited.
6) Turn the small FMS Knob to begin editing the field.
7) When the entry is complete, press the ENT Key.
8) Turn the large FMS Knob or press the ENT Key until 'SAVE' is highlighted.
9) Press the ENT Key.
Disconnecting a Wi-Fi Network
Select the DISCNCT Softkey.
Deleting a Saved Wi-Fi Network
1) While viewing the list of saved networks, press the FMS Knob to activate
the cursor.
2) Turn either FMS Knob to highlight the network to be deleted.
3) Select the DELETE Softkey. The selected network is removed from the list.
100
Cirrus Perspective ™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-09 Rev. A