Procedures
3) Turn the large FMS Knob to highlight the TO waypoint of the desired leg
within the departure.
4) Press the ACT LEG Softkey. A confirmation window showing the selected
leg is displayed.
5) With 'ACTIVATE' highlighted, press the ENT Key.
LOAD AN ARRIVAL PROCEDURE
1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'SELECT ARRIVAL'.
3) Press the ENT Key. The cursor is displayed in the 'ARRIVAL' field with a list
of available arrivals.
4) Turn the large FMS Knob to highlight the desired arrival.
5) Press the ENT Key. A list of transitions is displayed for the selected arrival.
6) Turn either FMS Knob to select the desired transition.
7) Press the ENT Key. A list of runways may be displayed for the selected
arrival.
8) Turn the large FMS Knob to highlight the desired runway.
9) Press the ENT Key.
10) With 'LOAD?' highlighted, press the ENT Key.
11) The arrival becomes part of the active flight plan.
ACTIVATE AN ARRIVAL LEG
Activate Arrival using the Quick Select Box:
1) Press the FPL Key on the PFD/MFD Control Unit to display the active flight
plan.
2) Use the Joystick to move the Quick Select Box to the TO waypoint of the
desired leg within the arrival.
3) Press the ACT LEG Softkey. A confirmation window showing the selected
leg is displayed.
4) With 'ACTIVATE' highlighted, press the ENT Key.
52
Cirrus Perspective
™
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-09 Rev. A