Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'USER' waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
11) Press the ENT Key. The cursor is displayed in the 'RAD' (radial) field. Enter
the desired radial from the reference waypoint.
12) Press the ENT Key.
13) Repeat step 10 to enter the next waypoint name.
14) Press the ENT Key. The cursor is displayed in the 'RAD' (radial) field for the
second waypoint. Enter the desired radial from the reference waypoint.
15) Press the ENT Key.
16) Press the FMS Knob to remove the flashing cursor.
CREATE A USER WAYPOINT DEFINED BY A RADIAL & DISTANCE FROM
ANOTHER WAYPOINT
1) Turn the large FMS Knob on the PFD/MFD Control Unit to select the 'WPT'
page group.
2) Turn the small FMS Knob to select the User WPT Information Page.
3) Press the NEW Softkey. A waypoint is created at the current aircraft
position.
4) Enter the desired waypoint name.
5) Press the ENT Key.
6) The cursor is now in the 'WAYPOINT TYPE' field. If desired, the waypoint
can be made temporary (deleted automatically when the system is turned
off). If the waypoint is to remain in the system, proceed to step 7.
a) Turn the large FMS Knob one click to the left to highlight
'TEMPORARY'.
b) Press the ENT Key to place a check-mark in the box. Turn the large
FMS Knob to place the cursor back in the 'WAYPOINT TYPE' field.
7) With the cursor in the 'WAYPOINT TYPE' field, turn the small FMS Knob to
display a list of waypoint types.
190-00821-09 Rev. A
Cirrus Perspective
™
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
Flight Planning
39