Generic Timer; Configure V-Speed Bugs; Set Barometric Minimum Descent Altitude - Garmin CIRRUS PERSPECTIVE SR22T Reference Manual

Flight Instruments

GENERIC TIMER

1) Press the TMR/REF Softkey, then turn the large FMS Knob to select the
time field (hh/mm/ss). Turn the FMS Knobs to set the desired time, then
press the ENT Key. The UP/DOWN field is now highlighted.
2) Turn the small FMS Knob to display the UP/DOWN window. Turn the FMS
Knob to select 'UP' or 'DOWN', then press the ENT Key. 'START?' is now
highlighted.
3) Press the ENT Key to START, STOP, or RESET the timer (if the timer is
counting DOWN, it will start counting UP after reaching zero). Press the
CLR Key or the TMR/REF Softkey to remove the window.

CONFIGURE V-SPEED BUGS

NOTE: V-speed values cannot be adjusted in all models.
1)
Press the TMR/REF Softkey.
2)
Turn the large FMS Knob to highlight the desired V-speed.
3)
Use the small FMS Knob to change the V-speed in 1-kt increments. Vx
may be adjusted up to 89 knots and Vy may be adjusted down to 89 knots.
Vglide and Vrotate cannot be adjusted. When a speed has been changed
from a default value, an asterisk appears next to the value.
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF
field
5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.

SET BAROMETRIC MINIMUM DESCENT ALTITUDE

1)
Press the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the OFF/BARO field to the right of
'MINIMUMS'.
3) Turn the small FMS Knob clockwise to BARO.
4) Press the ENT Key.
2
Cirrus Perspective ™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-09 Rev. A