www.ivankyo.com
OSD Language: to set up the language displayed in the operation interface.
Restore Factory Default: to reset the projector;
Blending: to adjust the background transparency of Menu interface. You can choose from Low, Middle, High and Off;
OSD Duration: to adjust the duration of keeping the Menu interface. You can choose from 5 Sec, 10 Sec, 15 Sec and Off;
Software Update (USB): to update the projector's software version.
2.
Press the Up and Down button to select the option you would like to change, then press the OK/Enter button to enter the submenu to set up.
3.
When you finish changing settings on a menu, press the Menu button on the projector or the Exit button on the remote to exit.
After Using Your Projector
Please turn off the projector after using it.
1.
Press the Power button on the projector or the remote;
2018-2019 VanTop, Inc. All rights reserved.
35 / 39