Vankyo Leisure 495W - Projector Manual
![]()
WHAT'S INCLUDED
![]()
NOTICE
Recommended
![Vankyo - Leisure 495W - Recommended Recommended]()
NOT Recommended
![Vankyo - Leisure 495W - NOT Recommended NOT Recommended]()
PRODUCT OVERVIEW
![Vankyo - Leisure 495W - PRODUCT OVERVIEW PRODUCT OVERVIEW]()
QUICK START
Projector Installation
- Horizontal Placement
![]()
- Ceiling Mounting
![]()
Note:
Whichever installation option you. select, please make sure:
- the projector is centered directly in front of the wall/screen, but not tilted or placedat an angle toward the wall/screen;
- to select the corresponding projection mode so the images can be projected correctly.
Power On/Off
- Plug the power cord into an outlet.
![]()
- Take off the lens cover.
![]()
- Press the Power Button to turn on the projector.
![]()
- Press the Power Button twice to turn off the projector.
![]()
Images Adjustment
- Rotate the Keystone Correction Ring to correct Vertical Keystone Distortion until the image isevenly rectangular.
![Vankyo - Leisure 495W - Images Adjustment - Step 1 Images Adjustment - Step 1]()
- Rotate the Focus Ring to sharpen the Image Focus until the blurred image becomes clear.
![Vankyo - Leisure 495W - Images Adjustment - Step 2 Images Adjustment - Step 2]()
- In Homepage interface, enter Setting > Image Scaling to enlargeor reduce the Image Size from 75% to 100% (optional).
![Vankyo - Leisure 495W - Images Adjustment - Step 3 Images Adjustment - Step 3]()
Homepage Overview
The default interface after booting is Homepage as shown.
![Vankyo - Leisure 495W - Homepage Overview Homepage Overview]()
In Homepage interface, when the underscore cursor locates at the Main Menu Bar, press
/
to toggle through menu items including MultiMedia, Input Source and Setting. Press
/ OK to enter the corresponding Submenu, then press
to return to Main Menu Bar.
- Multimedia page displays file categories of Multimedia Input (typically for a USB Disk), including MOVIE, PHOTO, MUSIC and TEXT.
- Input Source page displays three categories of input source, including MULTISCREEN, HDMI and AV.
- Setting page will guide you through all settings for the projector.
- The icon
will light up when the projector issuccessfullyconnectedto a Bluetooth audio device. - The ico n
will turn into
when the projector is successfully connected to a wireless network. - The icon
will turn into
when a USB disk is inserted.
USB Disk Connection
Step 1: Turn on the projector and insert your USB disk into the USB 1/USB 2 port of the projector.
![Vankyo - Leisure 495W - USB Disk Connection USB Disk Connection]()
Step 2: Go to Homepage> MultiMedia and selectthe file category you would like to display among MOVIE, PHOTO, MUSIC and TEXT, then enter the inserted USB Disk to check all files stored.
Step 3: To play a video file, please follow the below steps:
- Select MOVIE inthe MultiMedia interface to correspondingly r eadvideofilesstored.
- Press OK/
ontheprojector/remote foracertain v ideo filetoenter f ull-screen display. - Press OK Kontheprojector orpress OK/Menu ontheremote whenplaying back avideo to bringup the toolbar to control the video playing.
Note: Operation for playing a photo file, a music file and a text file is the same with that for playing a video file, but pleasemakesureto select the correctfile category; that is, for playing a photo file, select Photo in MultiMedia interface; likewise, for music, select MUSIC, for text, select TEXT.
Step 4: Press
on the projector/remote to go back to Homepage.
File Category | Format Supported |
Video | 3GP/AVl/MKV/MOV/MP4/MPG/ VOB/MPG/RMVB/RM |
Photo | JPEG/BMP/PNG |
Music | MP3/WMA/OGG/AAC/FLAC/WAV |
Text | TXT |
HD Connection
Step 1: Turn on the projector and connect your device to the HDMI port of the projector with the provided HD cable.
![Vankyo - Leisure 495W - HD Connection - Step 1 HD Connection - Step 1]()
Step 2: Go to Homepage > Input Source, select HDMI as the input source, then the contents of your device will be mirrored to the screen/wall.
Tip: For Windows 7 or higher system, press the "Windows Logo + P" key combination to access the below four display modes.
![]()
- PC screen only option displays contents on computer screen only.
- Duplicate option displays the same contents on both computer screen and projected screen.
- Extend option splits the dispay between the computer screen and the projected screen.
- Second screen only option displays contents only on the projected screen.
AV Connection
Step 1: Turnon the projector and connect your deviceto the AVPort of the projector with an AVcable(not included).
![Vankyo - Leisure 495W - HD Connection - Step 2 HD Connection - Step 2]()
Step 2: Go to Homepage > Input Source, select AV as the input source, then the contents of your device will be mirrored to the screen/wall.
SCREEN MIRRORING
For iOS System
Screen Mirroring via Router's WiFi
- Go to Homepage > InputSource, s elect MULTISCEEN as the input source to enter the CAST interface.
![Vankyo - Leisure 495W - For iOS System Screen - Mirroring via Router's WiFi - Step 1 For iOS System Screen - Mirroring via Router's WiFi - Step 1]()
- Select Cast Settings>WiFi Setting to search and connect the projector to your router's WiFi.
![Vankyo - Leisure 495W - For iOS System Screen - Mirroring via Router's WiFi - Step 2 For iOS System Screen - Mirroring via Router's WiFi - Step 2]()
- Enter WiFi settings of your iOS device and connect it to the same router's WiFi.
- Return the screen back to CAST interface, then select iOS Cast to enter the following interface.
![Vankyo - Leisure 495W - For iOS System Screen - Mirroring via Router's WiFi - Step 3 For iOS System Screen - Mirroring via Router's WiFi - Step 3]()
- Activate Screen Mirroring/AirPlay Mirroring in the Control Center of your iOS device and search for the projector.
- Select LEISURE-495W-XXXX-(icast) from the searchinglist to connect.
![Vankyo - Leisure 495W - For iOS System Screen - Mirroring via Router's WiFi - Step 4 For iOS System Screen - Mirroring via Router's WiFi - Step 4]()
- The contents on your iOS device will be mirrored to the wall/screen after a successful connection.
Tip: To activate screen mirroring function of your MacBook, please follow the below steps:
- Click Control Center icon in the menu bar at the top of the Mac screen.
- Click Screen Mirroring to search for the projector.
- Select LEISURE-495W-XXXX-(icast) to connect.
![Vankyo - Leisure 495W - For iOS System Screen - Mirroring via Router's WiFi - Step 5 For iOS System Screen - Mirroring via Router's WiFi - Step 5]()
Screen Mirroring via a Lightning Cable
- Go to Homepage >Input Source, select MULTISCEEN as the input source to enter the CAST interface.
- Select iOS Cable Cast to enter the following interface.
![Vankyo - Leisure 495W - Screen Mirroring via a Lightning Cable Screen Mirroring via a Lightning Cable]()
- Connect your iOS mobile device to the USB 2 port of the projector using the ORIGINAL lightning cable.
- Select Trust in the pop-up window of Trust This Computer?
![]()
The contents on your iOS device will be mirrored to the wall/screen after a successful connection.
For Android System
To activate this function, please make sure your Android device supports Multi-screen/Wireless display. Names may differ from one Android device to another.
- Turn on the WiFi s witch on your Android device.
Note: Successful WiFi connection is not a must, but please make sure the WiFi switch on your Android device is ON. - Go to Homepage > InputSource, select MULTISCEEN as the input source to enter the CAST interface.
- Select Miracast to enter the following interface.
![Vankyo - Leisure 495W - For Android System For Android System]()
- Activate Multi-screen function on your Android device and search for the projector.
- Select LEISURE-495W-XXXX from the searching list to connect.
- The contents on your Android device will be mirrored to the wall/screen after a successful connection.
For Windows 10 System
To activate this function, your Windows 10 device must support the Miracast feature.
- Turn on the WiFi switch on your Windows 10 device.
Note: Successful WiFi connection is not a must, but please make sure the WiFi switch on your Windows 10 device is ON. - Go to Homepage > Input Source, select MULTISCEEN as the input source to enter the CAST interface.
- Select Windows Cast to enter the following interface.
- Press the "Windows Logo+ P" key combination on your keyboard to enter PROJECT interface, then select "Connect to a wireless display" to searcht he projector.
- Select LEISURE-495W-XXXX from the searching list to connect.
- The contents on your Windows 10 device will be mirrored to the wall/screen after a successful connection.
Notes:
- The fluency of screen mirroring will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
- Make sure your mobile device is close to the projector when using wireless connection. A distance within 3ft is recommended.
- Some mobile devices may not support screen mirroring due to the compatibility.
- Due to copyright restrictions of Hulu, Netflix, and similar services, the contents on these streaming services CAN NOT be mirrored or cast.
- If the projected image freezes, please reboot the projector, then go to Homepage> Input Source> MULTISCEEN > Cast Settings > Restore Factory Default and select Confirm to do a reset on screen mirroring module.
SCREEN CASTING
- Connect y ourmobiledeviceandtheprojectorto thesamerouter's WiFi.
- Go to Homepage > Input Source, select MULTISCREEN as the input source to enter the CAST interface.
- Select DLNA to enter the following interface.
- Launch a video player APP on your mobile device and select a video to play.
- Tap
to search for the projector. - Select EISURE-495W-XXXX- (dlna) to connect.
- The contents on your device will be cast to the wall/screen.
Notes: When you cast a video from your mobile device, the video will only be displayed on the projected screen and you can still use your mobile device without interrupting the video or showing any of your other content.
BLUETOOTH CONNECTION
The projector supports connection with Bluetooth audio devices (typically Bluetooth speakers/earphones/ soundbars). It allows you to get good-quality audio output from a streaming device or other video source connected to your projector.
- Make sure the Bluetooth audio deviceis ready to pair.
- Go to Homepage >Setting, then enter Connection Setting> Bluetooth to access the following interface.
- Press
to turn on Bluetooth of the projector and search for the Bluetooth audio device to connect. - After a successful connection, the Bluetooth icon on the Homepage will lightup.
Notes:
- When a Bluetooth audio device is pairedwith the projector, the built-in speakersystemand Audio Out port of the projector are disabled.
- To turn off Bluetooth of the projector, please go to Homepage > Setting > Connection Setting > Bluetooth, then press
; or you can press
on the remote to quickly turn off Bluetooth in the course of screen mirroring.
SETTINGS
Settings for Screen Mirroring Module
Go to Homepage > Input Source, select MULTISCEEN as the input source to enter the CAST interface, then enter Cast Settings to access setting options exclusive for screen mirroring module.
![Vankyo - Leisure 495W - Settings for Screen Mirroring Module Settings for Screen Mirroring Module]()
- WiFi Setting
Connect the projector to your router's WiFi. - Online Update
Enter to update the firmware of screen mirroring module when a newer version is available. - Restore Factory Default
Restore the screen mirroring module to the factory settings. - Software Version
Check system version of the projector.
Settings for the Projector System
How to Enter
Option 1:
Go to Homepage > Setting to access Picture Setting, System Setting and Connection Setting. Be sure to press
to check the full list of setting options.
![Vankyo - Leisure 495W - Settings for the Projector System - How to Enter - Step 1 Settings for the Projector System - How to Enter - Step 1]()
Option 2: In any interface, press
on the remote to quickly access Picture Setting, System Setting and Connection Setting.
![Vankyo - Leisure 495W - Settings for the Projector System - How to Enter - Step 2 Settings for the Projector System - How to Enter - Step 2]()
Picture Setting
- Projection Mode
Depending on how you position the projector, you may need to change projection modes so that the images can be projected correctly. Available options include Normal Front(default), Normal Back, Invert Front and Invert Back. - Image Scaling
Enter to enlarge or reduce image size from 75% to 100%. - Aspect Ratio
Enter to change Aspect Ratio among AUTO (default), 4:3 and 16:9.
Note: Select AUTO, then the projector will set the aspect ratio automatically according to the input source. - Picture Mode
Options include Standard, Soft, User and Dynamic. You can use the Left/Rig ht button to toggle through all the available options.
System Setting
- OSD Language
Enter to select a language for the projector. - Software Update(USB)
Update the projector using a USBdisk with upgrade file named as YG460R3_ST58.bin. (Contact our customer serviceto get the upgrade file.) - Restore Factory Default
Restore the projector to the factory settings. - Auto SleepTimer
Set the time duration for the projector to turn off automatically. Options include Never, 4Hours, 6Hours and 8Hours.
Connection Setting
- WiFi setting
Connect the projector to your router's WiFi. - Bluetooth
Turn on to search and connect the projector to any Bluetooth audio device (typically Bluetooth speakers/ earphones/soundbars) and get good-quality audio output.
PROJECTION DISTANCE&SIZE
![Vankyo - Leisure 495W - PROJECTION DISTANCE&SIZE PROJECTION DISTANCE&SIZE]()
* The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed.
* Ambient darkness will improve the clarity of the projected images.
SPECIFICATION
Display Technology | LCD | Light Source | LED |
Resolution | Native 1920 x 1080 | Input Signal | 576k 720P\ 1080P |
Installation Type | Front/Rear/Ceiling | Aspect Ratio | |
Focus | Manual | Electronic Keystone | 150 |
Speaker | 3W/40hm | Power Supply | AC 100-240V, 50/60Hz |
Unit Dimension | 4.84 x 7.01 x 3.35 inches (123 x 178 x 85mm) | Unit Net Weight | 3.086 lbs(1.4kg) |
Photo Format Supported | JPGE/BMP/PNG | Audio Format Supported | MP3/WMA/OGG/AAC/FLAC/WAV |
Mounting Screws | 1/4" | Screw Number | Not included |
Video Format Supported | 3GP(H.263,MPEG4) /AVI(XVID, DIVX,H.264)/MKV(XVID,H.264,DIVX)/FLV(FLV)/MOV(H.234)/ MP4(PEG4,AVC)/MPG(MPEG1]/VOB(MPEG2)/MPG(MPG-PS)/RMVB(RV40)/RM |
Ports | USB Port x 2/ HD In x 1/ AV In x 1 / Audio Out x 1 |
TROUBLESHOOTING GUIDE
- The contents from Hulu, Netflix, and similar services can not be mirrored or cast.
- Due to the copyright restriction from Hulu, Netflix, and similar services, the contents CAN NOT be mirrored or cast.
- What should | do if | want to watch the content from Hulu, Netflix, and similar services via the projector?
- Please prepare a Fire TV stick, Roku stick or Chromecast™ (not included), then connect it to the projector.
- Blurry Image
- Adjust focus ring/keystone
- Projector and screen/wall must be in effective distance.
- Remote Unresponsive
- Make sure remote points at IR receiver directly.
- Do not cover IR receiver.
- Try a new pair of AAA batteries.
- Upside Down Images
- Go to Homepage > Setting > Picture Setting > Projection Mode to flip the projection image.
- Factory Reset
- Reset the screen mirroring module to the factory settings
Go to Homepage > Input Source > MULTISCEEN > Cast Settings > Restore Factory Default, then select Confirm to do a reset. - Reset the projector to the factory settings
Go to Homepage > Setting > System Setting > Restore Factory Default or press
on the remote in any interface to access System Setting and enter Restore Factory Default, then select Confirm to reset the projector to default settings.
support.uk@ivankyo.com
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Vankyo Leisure 495W - Projector Manual
Need help?
Do you have a question about the Leisure 495W and is the answer not in the manual?
Questions and answers