Connecting To The External Storage Device - Vankyo Leisure 410 User Manual

Table of Contents

www.ivankyo.com

Step 8: Adjust the focus ring and keystone (on the back side of the projector) to get the best image performance.

Tips:

After you plug the power cord into the inlet, turn on the projector until the LED indicator on the projector shows solid Red. If the projector is turned on and working properly, the

LED indicator shows solid Blue.

Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children;

Install 2 pieces of AAA batteries into the remote before using it.

Connecting to the External Storage Device

You can project movies, music, photos, and texts by connecting USB Drive, SD Card, Hard Disk (extra power supply is required) to your projector even without using a computer

or a mobile device.

Step 1: After connecting the different external devices, press the

Step 2: Press the Up/Down/Source on the projector or remote to select the correct input source, then press the OK/Enter button of the projector/remote to confirm. For USB/Hard

Disk or SD card, please select input source USB/SD;

button on the projector or the Source button on the remote to enter the interface of Input Source.

9 / 39

Table of Contents