Drive System; Stapler; Removing The Front Door; Removing The Escape Tray Cover - Canon Finisher-T1 Service Manual

3.2 Drive System

3.2.1 Stapler

3.2.1.1 Removing the Front
Door
1) Open the front door [1] and remove the clip [2].
2) Lift the front door [1] to remove.
[1]
F-3-30
3.2.1.2 Removing the Escape
Tray Cover
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
[3]
[1]
F-3-31
0009-4493
[2]
0009-4414
[1]
[2]
3.2.1.3 Removing the Front
Inside Upper Cover
1) Remove the screw [1] and release the hook of the
fixing plate (lower) [2] of the front lower cover. Then
remove the front lower cover [3].
2) Remove the screw [4] and remove the fixing plate
(upper) [5] of the front lower cover.
[3]
F-3-32
1) Remove four screws [1], open the escape door [2],
and then remove the front inside upper cover [3].
F-3-33

3.2.1.4 Removing the Stapler

1) Pull out the stapler, remove screw [1], and remove
Chapter 3
0009-4494
[5] [4] [1]
[2]
[2]
[3]
[1]
0009-3631
3-9