Removing The Grate-Shaped Upper Guide; Removing The Tray 1; Removing The Tray 2 - Canon Finisher-T1 Service Manual

[3]
F-3-67
1) Remove four screws [1], open the escape door [2],
and then remove the front inside upper cover [3].
F-3-68
3.3.1.5 Removing the Grate-
shaped Upper Guide
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under

"Removing the Tray 1.").

2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
[5] [4]
[1]
[2]
[2]
[3]
[1]
0009-3651
[2]
[3]
[1]
F-3-69
3.3.1.6 Removing the Tray 1
When moving the tray down to attach it, you need
to push the tray lift motor gear [1] to the front (using
a screwdriver or the like) to release the clutch.
However, when the clutch is released, the tray [2]
drops by its own weight. Be sure to hold the tray
with your hand when releasing the clutch.
[1]
F-3-70
1) Remove the screw [1] and remove the stopper [2] at
the front.
Chapter 3
[3]
0009-3652
[2]
3-19