Static Charge Eliminator 3; Removing The Escape Door; Removing The Escape Delivery Static Charge Eliminator - Canon Finisher-T1 Service Manual

Chapter 3
F-3-219

3.4.4 Static Charge Eliminator 3

3.4.4.1 Removing the Escape
Door
1) Open the front door.
2) Remove two screws [1] and remove the escape door
[2].
F-3-220
3.4.4.2 Removing the Escape
Delivery Static
Eliminator
1) Remove two screws [1] and remove the escape
delivery static charge eliminator [2].
3-56
0009-4400
[2]
[1]
Charge
0009-4175
F-3-221
A ground plate [1] is provided in the area where the
escape delivery static charge eliminator [2] is
mounted. When mounting the escape delivery static
charge eliminator [2], insert it in the lateral
direction.
F-3-222