Removing The Escape Tray Cover; Removing The Front Inside Upper Cover; Removing The Grate-Shaped Upper Guide; Removing The Tray 1 - Canon Finisher-T1 Service Manual

[2]
[1]
F-3-38
3.2.2.3 Removing the Escape
Tray Cover
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
[3]
[1]
F-3-39
3.2.2.4 Removing the Front
Inside Upper Cover
1) Remove the screw [1] and release the hook of the
fixing plate (lower) [2] of the front lower cover. Then
remove the front lower cover [3].
2) Remove the screw [4] and remove the fixing plate
(upper) [5] of the front lower cover.
1) Remove four screws [1], open the escape door [2],
0009-4415
and then remove the front inside upper cover [3].
[1]
[2]
3.2.2.5 Removing the Grate-
0009-4497 shaped Upper Guide
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under

"Removing the Tray 1.").

2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
[5] [4]
[1]
[3]
F-3-40
F-3-41
Chapter 3
[2]
[2]
[3]
[1]
0009-3665
3-11