Removing The Tray 1 - Canon Finisher-T1 Service Manual

Chapter 3
[2]
[3]
[1]
F-3-122

3.3.5.6 Removing the Tray 1

When moving the tray down to attach it, you need
to push the tray lift motor gear [1] to the front (using
a screwdriver or the like) to release the clutch.
However, when the clutch is released, the tray [2]
drops by its own weight. Be sure to hold the tray
with your hand when releasing the clutch.
[1]
F-3-123
1) Remove the screw [1] and remove the stopper [2] at
the front.
3-32
[3]
0009-3715
2) Remove the screw [1] and remove the stopper [2] at
the back.
3) Remove two screws [1], open three harness
retainers [2], and disconnect two connectors [3].
[2]
4) Lift tray 1 [1] to remove it.
[2]
F-3-124
[1]
F-3-125
[3]
[3]
F-3-126
[1]
[2]
[1]
[2]
[1]
[2]