Document Feeding System; Process Tray Assembly; Removing The Front Door; Removing The Rear Upper Cover - Canon Finisher-T1 Service Manual

Chapter 3
3.3
Document
System

3.3.1 Process Tray Assembly

3.3.1.1 Removing the Front
Door
1) Open the front door [1] and remove the clip [2].
2) Lift the front door [1] to remove.
[1]
F-3-64
3.3.1.2 Removing the Rear
Upper Cover
1) Remove four screws [1] and remove the rear upper
cover [2].
3-18
Feeding
0009-4502
[2]
0009-4504
[2]
[1]
F-3-65
3.3.1.3 Removing the Escape
Tray Cover
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
[3]
[1]
F-3-66
3.3.1.4 Removing the Front
Inside Upper Cover
1) Remove the screw [1] and release the hook of the
fixing plate (lower) [2] of the front lower cover. Then
remove the front lower cover [3].
2) Remove the screw [4] and remove the fixing plate
(upper) [5] of the front lower cover.
0009-4419
[1]
[2]
0009-4505