Chapter 3
[1]
(rear)
F-3-51
3) Remove the screw [1] and the stopper plate [2];
then, slide father out the compartment [3].
(rear left of the
[2]
compartment)
F-3-52
4) Remove the 3 screws [1], and detach the right cover
[2].
3-14
[2]
[1]
[3]
F-3-53
5) Remove the screw [1] of the harness guide,
disconnect the connector [2], and remove the 3 screws
[4] each on the right and left of the compartment rail
[3]; then, lift the compartment [5] slightly to detach it
toward the front.
[1]
[2]
[4]
F-3-54
6) Place the compartment [5] on the base you prepared
in step 1).
3.3.5.3 Removing the Lifter
Cable (deck rear)
1) Remove the screw [1] (1 pc. each), and remove the
upper sensor cover [2] and the lower sensor cover
[3].
2) Disconnect the 4 connectors [4].
[2]
[1]
[4]
[3]
[5]
0009-2108