Waveform Memory Commands - Agilent Technologies 54753A Programmer's Reference Manual

Waveform Memory Commands

Command :WMEMory<number>:SAVE {CHANnel<number> |
FUNCtion<number> | RESPonse<number> |
WMEMory<number> | HISTogram | FFT}
Stores the specific channel, waveform memory, function, histogram, or FFT
to the waveform memory.
For channels: an integer, 1 through 4, indicating the slot in which the channel
<number>
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. Storing a waveform memory to itself
does not change the memory. For TDR responses: 1, 2, 3, or 4.
42