Agilent Technologies 54753A Programmer's Reference Manual page 26

<number>
<destination>
<filename>
<format>
Command
<number>
Mask Test Commands
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
{OFF | WMEMory<number> | DISK}
A descriptive file prefix consisting of up to four characters. If no filename is
specified, the prefix defaults to CH1A..CH4B, FN1, FN2, FFT, HIST,
MEM1..MEM4, RSP1..RSP4.
{TEXT [,YVALues | VERBose ] | INTernal}
:MTESt:SCALe:SOURce[?] {CHANnel<number> |
FUNCtion<number> | RESPonse<number> |
WMEMory<number>}
Sets the source used by the mask subsystem for interpretation of the
SCALe:Y1 and SCALe:Y2 parameters. SCALe:Y1 and SCALe:Y2 set the
vertical boundaries of the coordinate system for mask testing, and are
affected by the scaling of the selected source.
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B indicating which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR response: 1, 2, 3, or 4.
24