Measure Commands - Agilent Technologies 54753A Programmer's Reference Manual

Command
<source>
<number>
Command
<source>
<number>

Measure Commands

:MEASure:DELTatime[?] [<source>[,<source>]]
Measures the delta time between two edges. If one source is specified, the
delta time from the leading edge of the specified source ot the trailing edge of
the specified source is measured. If two sources are specified, the delta time
from the leading edge on the first source to the trailing edge on the second
source is measured.
{CHANnel<number> | FUNCtion<number> |
RESPonse<number> | WMEMory<number>}
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
:MEASure:DUTycycle[?] [<source>]
Measures the ratio of the positive pulse width to the period.
{CHANnel<number> | FUNCtion<number> |
RESPonse<number> | WMEMory<number>}
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
25