Tdr Commands - Agilent Technologies 54753A Programmer's Reference Manual

Tdr plug-in modules

Table of Contents

Command

TDR Commands

:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:CALibrate

Begins a TDR or TDT normalization and reference plane calibration. Which

calibration is done (TDR or TDT) depends on the setting of the TDRTDT

control.

:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:CALibrate

:CANCel

Activates the cancel softkey during a TDR or TDT normalization and

reference plane calibration.

:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:CALibrate

:CONTinue

Activates the continue softkey during a TDR or TDT normalization and

reference plane calibration.

:TDR{2 | 4}:PRESet

Sets up the instrument for TDR or TDT measurements, based on the

stimulus.

Table of Contents

54754a