Waveform Commands - Agilent Technologies 54753A Programmer's Reference Manual

Waveform Commands

Command :WAVeform:SOURce[?] {CHANnel<number> |
FUNCtion<number> | RESPonse<number> |
WMEMory<number> | DATabase | HISTogram | FFT}
Selects a channel, function, TDR response, waveform memory, database,
histogram, or FFT as the waveform source.
For channels: an integer, 1 through 4, indicating the slot in which the channel
<number>
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
41