Agilent Technologies 54753A Programmer's Reference Manual page 36

Command
<source>
<number>
Command
<source>
<number>
Measure Commands
:MEASure:VMIN[?] [<source>]
Measures the absolute minimum voltage present on the selected source
waveform. When FFT is the specified source, the minimum value in the
spectrum is measured.
{CHANnel<number> | FUNCtion<number> |
RESPonse<number> | WMEMory<number> | FFT}
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
:MEASure:VPP[?] [<source>]
Measures the absolute maximum and minimum voltages on the selected
source, then calculates the peak-to-peak voltage as the difference between
the two voltages. When FFT is the specified source, the range of values in the
spectrum is measured.
{CHANnel<number> | FUNCtion<number> |
RESPonse<number> | WMEMory<number> | FFT}
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
34