Commands Relevant To Attenuators - Agilent Technologies 11713B Operating And Service Manual

Commands Relevant to Attenuators

N O T E
11713B/C Operating and Service Manual
To Configure Attenuator Type
The commands below set the attenuator type (model number) for
corresponding attenuators.
• :CONFigure:[BANK1]:X
{NA|AG8494g|AG8495g|AG8495k|AG8496g|AG8497k|AG84904k|A
G84905m|AG84906k|AG84907k|AG84908m}
• :CONFigure:[BANK1]:Y
{NA|AG8494g|AG8495g|AG8495k|AG8496g|AG8497k|AG84904k|A
G84905m|AG84906k|AG84907k|AG84908m}
• :CONFigure:BANK2:X
{NA|AG8494g|AG8495g|AG8495k|AG8496g|AG8497k|AG84904k|A
G84905m|AG84906k|AG84907k|AG84908m}
• :CONFigure:BANK2:Y
{NA|AG8494g|AG8495g|AG8495k|AG8496g|AG8497k|AG84904k|A
G84905m|AG84906k|AG84907k|AG84908m}
For AG849xh, use AG849xg. For AG84904l/m, use AG84904k. For 84906l, use
AG84906k. For AG84907l, use AG849907k.
To Set Attenuation Level
The commands below are used to set the attenuation level of
corresponding attenuator(s).
• ATTenuator:[BANK1]:X <attenuation value in dB>
• ATTenuator:[BANK1]:Y <attenuation value in dB>
• ATTenuator:BANK2:X <attenuation value in dB>
• ATTenuator:BANK2:Y <attenuation value in dB>
To Query Attenuation Level
The commands below return the current attenuation value for
corresponding attenuator(s).
• ATTenuator:[BANK1]:X?
• ATTenuator:[BANK1]:Y?
• ATTenuator:BANK2:X?
• ATTenuator:BANK2:Y?
6
Remote Operations
69