Ir Header (Jp6); Parallel Port Header-Ext. Print Port (Jp7) - Shuttle FX83 User Manual

IR Header (JP6)

E7
If you have an infrared device, this mainboard can implement IR tranfer func-
tion. To enable the IR transfer function, follow these steps:
6
5
4
3
2
1
Pin Assignments:
1=NC
3=VCC
5=IRTX
Note: Before connect your IR device, please be sure each IR on board pin
allocation is matchable with the pin of the IR device. Other wise,
incorrect IR connection may do damage to your IR device.
E8

Parallel Port Header-EXT. Print Port (JP7)

One 26 pins port header is located at the rear panel of the maiboard. The header
is used to connect the cable attached to parallel connector. But the parallel
cable and connector are optional at the time of purchase.
Pin Assignments:
1=P_-STB
5=PPPD3
9=PPPD7
13=P_SLCT
17=P_-SLIN
21=GND
25=GND
2=KEY
4=GND
6=IRRX
2=P_PPD0 3=P_PPD1
6=P_PPD4 7=P_PPD5
10=P_-ACK 11=P_BUSY 12=P_PE
14=P_-AFD 15=P_-ERR
18=GND 19=GND
22=GND 23=GND
26=KEY
- 37 -
IR Header
JP6
4=P_PPD2
8=P_PPD6
16=P_-INIT
20=GND
24=GND
EXT. Print Port
JP7