Data Acquisition - Easy Gathering - Newport XPS-D User Interface Manual

XPS-D Controller
EDH0405En1012 – 09/18
The functions are listed in alphabetical order and can be searched for using the search
bar at the top of the Function list. Functions listed are those available for display
through the Controller → Terminal configurator or functions available for the current
system configuration. For example, if the system consists only of SingleAxis groups, no
group specific functions for Spindles, XY groups, XYZ groups or MultipleAxis groups
will be listed.
2.24 Data Acquisition – Easy Gathering
Under Data acquisition → Easy gathering, users can define and save servo
synchronous data gathering configurations for routine data acquisition operations
including: time-based, event-based, or function based gathering. For more in-depth
information regarding data gathering types, refer to Features Manual.
The following procedure describes how to use the webpage to configure easy data
gathering. In the initial factory configuration, an example trigger and data configuration
is set (see example in the image below). It should be deleted before starting a new
gathering.
24
User Interface Manual