Front Panel - Move - Newport XPS-D User Interface Manual

XPS-D Controller
2.17 Front Panel – Move
The Move page provides access to basic group functions like initialize, home, or motor
disable, and executes relative and absolute moves where speed, acceleration and jerk
time can be modified during motion (but not during the acceleration period).
The Move page also provides a convenient review of all important group information
like group names, group states and positions. All motion groups are listed in the Move
page.
• Click "Initialize". The State number changes from 0 to 42 and the Action button
changes from "Initialize" to "Home".
• Click "Home". The stage starts moving to find its reference position. When done,
the state number is 11 and the action button changes to disable.
• Enter an allowed absolute position value in the "Abs move 1" or"Abs move 2", or a
relative move value in the "Relative move" field and click "Go". The stage moves to
the new position.
• You can click on "Disable" to disable a stage. The Action button changes to
"Enable".
• Click on "Enable" to enable the stage again without loosing encoder position.
A spindle group can do relative moves and absolute moves. So it can be used in the
Move page. See Features Manual for more information about Spindle moves.
NOTE
17
User Interface Manual
EDH0405En1012 – 09/18