Control Panel - Martin MAC Allure Wash PC User Manual

Control panel

You can configure individual fixture settings (such as the MAC Allure Wash PC's DMX address), read out
data, execute service operations and view error messages using the fixture's backlit graphic display and
control panel.
A
B
When the MAC Allure Wash PC is powered on, it first boots and resets, then it displays its DMX address (or
its fixture ID number, if one has been set) and any status messages (see page 31) in the display A.
The display can be set to automatically rotate to match standing or hanging fixture orientation in the
PERSONALITY → DISPLAY menu or the Shortcuts menu (see "Shortcuts" on page 9).
Using the control panel
• Press the Menu button C or Enter button E to access the menus.
• Use the Up and Down buttons D to scroll up and down menus.
• Press the Enter button E to enter a menu or make a selection.
• The currently selected item in a menu is indicated by a star
• Press the Menu button C to step backwards through the menus.
Status LED
The LED F next to the control buttons indicates fixture status by showing a color and DMX status by flashing
or lighting constantly:
• GREEN: All parameters normal.
• AMBER: Warning (service interval exceeded, for example).
If ERROR MODE is set to Normal, the warning message will be shown in the display. If ERROR MODE is
set to Silent, the display must be activated by pressing the Enter button C to display the warning
message.
• RED: Error detected.
If ERROR MODE is set to Normal, the error message will be shown in the display. If ERROR MODE is set
to Silent, display the error message BY GOING TO NORMAL OR SERVICE - ERROR LIST.
• FLASHING: No DMX signal detected.
• CONSTANT: Valid DMX signal detected.
The status LED is only active when the display is active. If the display enters sleep mode, the LED will also
sleep.
8
DMX ADDRESS
DMX RANGE
A - XLR connectors
B - EtherCON connectors
C - Menu
D - Up/Down
Figure 2: Display and control panel
MAC Allure Wash PC User Guide
1
1–68
C
H
E- Enter
F - Status LED
G - USB port / battery compartment
H - LCD display
.
D
E
F
D
G