Martin MAC Allure Wash PC User Manual page 33

Short code
Long message and explanation
UPL ERR LED DRV
UELD
Could not upload new LED driver firmware during a firmware upload. Error cleared when new
firmware is uploaded successfully or power is cycled off and on.
UI TEMP CUTOFF
UITC
User interface (LCD display and control panel) temperature cutoff activated.
ZOOM SENSOR ERR
ZSER
Zoom position electrical indexing system timeout.
The fixture reports a calibration error if valid calibration data is not detected in EEPROM. The fixture may be
unable to read/write calibration data to EEPROM.
Table 6: Error messages
Service and display messages 33