Fixture Control Menu - Martin Mania EFX500 User Manual

from one scene to the nextS. If you select tracking, the DMN controller
defines fade times.
Unsure about speed and tracking ?
Set the fixture to tracking if you are using programmed fade times or
macros on your DMN controller. Select an effects speed if you are ":$
using programmed fade times or macros on your DMN controller.
However, if you are using fade times on your controller and have set the
fixture to tracking, but effects movement is rough and irregular, setting
fade times on your controller to Qero and selecting an effects speed may
give smoother movement.
Effects movement is set to otracking[ if the fixture is in DMN mode H and by
default.
D MX si gn al in di cato r
When the Mania EFN
receives a valid DMN
DMX signal received
signal, the green Data
LED will light to show that
the fixture is receiving
control data.
Data LED
DMX Address
lit
X100 X10 X1 Mode
F i x t u r e c o n t r o l m e n u
You can change various personality settings by holding the mModen button
pressed in for 5 seconds and then using the buttons on the control panel.
Changing the DMN mode is described in d3+$$'"()56.)1:;+)@):9)Ae on
page H6.
Inverting pan an d tilt for symmetrical action
You can create symmetrical action across multiple fixtures in
synchroniQed and DMN operation by inverting pan and5or tilt on some
fixtures so that they omirror[ the action of others. When one fixture pans
left, for example, a fixture on the other side of the dance floor can bet set
to pan right.
Operation 19