Sending Fax In Case Of A Fault Alarm - Samson TROVIS 5474 Mounting And Operating Instructions

Parameters
Access number
Phone number
* Digits 0 to 9, P = pause, - = end, max. 14 characters
** Digits 0 to 9, P = pause, - = end, max. 22 characters

9.5.2 Sending fax in case of a fault alarm

The controller type is forwarded in addition to a detailed error description. The recipient's fax
number must be programmed in the PA9 level. Optionally, also the sender's station ID can be
programmed; this number will then be forwarded as well. If no station ID is specified, the string
"nicht verfügbar" (not available) is inserted.
4
Fax number:
Digits 0 to 9, P = Pause, - = End, max. 14 characters
(place an additional 0 in front when dialing from a private branch exchange)
4
Phone number of sending fax:
Digits 0 to 9, P = Pause, - = End, max. 14 characters
Functions
Modbus
Modem function
Text message alarm to a mobile phone
Alarm sent per fax
Fax dialing procedure
Parameters
Fax number
Phone number of sending controller
* Digits 0 to 9, P = pause, - = end, max. 14 characters
WE Parameter level / Range of values
– PA9 / configurable as required*
– PA9 / configurable as required**
WE Configuration
ON Co9 -> Fb00 = OFF
OFF Co9 -> Fb01 = OFF
OFF Co9 -> Fb06 = OFF
OFF Co9 -> Fb10 = ON
OFF Co9 -> Fb11
WE Parameter level / Range of values
– PA9 / configurable as required*
– PA9 / configurable as required*
Operational faults
65
EB 5474 EN