© ANITA
19. CHECK THE PRESSURE OF PRESSER FOOT
Turn the hand wheel
①
counterclockwise, decrease the pressure or increase the pressure.
20. PRESSER DRIVE ADJUST
Loosen the screw
③
, keep the clearance between driver
①
and presser bracket
②
at 0.5 mm,
then tighten screw
③
.
21. THREAD GUIDE ADJUSTMENT
Loosen screw
②
, move the thread guide
①
to the left,
the thread increase, move to the right, the thread decrease.
Operate according to the sewing track and get the proper
thread track, then tighten screw
②
.
MP02900EN_181023
15