© ANITA
5. ADJUST THE POSITION OF FEED DOG IN THE NEEDLE PLATE GROOVE
1. Loosen the screw
dog in the center of needle plate groove (add the picture of needle plate and the feed dog),
then tighten the screw
2. Adjust the position of feed transfer
⑩
, to keep feed transfer locate in the center of feed shaft ○1 groove, then tighten the
screws
⑥ ⑦ ⑧ ⑨ ⑩
MP02900EN_181023
③ ④ ⑤ ⑥
move the shaft
③ ④ ⑤ ⑥
.
②
to the feed shaft
.
①
of feed left and right to keep the feed
①
, loosen screw
⑥ ⑦ ⑧ ⑨
7