Timex Global Trainer M229 User Manual page 28

To Configure Sensor Settings
1. Press MODE until CONFIGURE displays.
2. Press q to highlight SENSORS, then press 8 .
3. Press p or q to highlight the setting to change, then press 8 to open the setting change window.
4. Press p or q to highlight a selection in the setting change window, then press 8 to confirm your selection.
Select NO to prevent the Global Trainer™ Bodylink® System Watch from searching for the selected sensor
or to disconnect a sensor. Select SCAN to search for and connect a sensor.
When the sensor is successfully paired, an abbreviation appears in the field to the right of the sensor name:
You can connect only up to four ANT+™ sensor devices at one time. If you try to connect a fifth, the last de-
vice connected is disconnected.
User Info
Input your personal information into the Global Trainer™ Bodylink® System Watch to assist in determining
heart rate zones, calorie expenditure, and default screens in Performance Mode.
Performance Mode:
To Configure Personal Settings
1. Press MODE until CONFIGURE displays.
2. Press q to highlight USER INFO, then press 8 .
3. Press p or q to highlight the setting to change, then press 8 to open the setting change window.
4. Press p or qto highlight a selection in the setting change window, then press ENTER to confirm your selec-
tion.
Setting Group
Gender
Weight
Date of Birth: Month
Height
Date of Birth: Day
Date of Birth: Year
Sensor
Heart Rate
Speed
Cadence
Speed / Cadence
Power Meter
Select MALE or FEMALE
Enter your weight, then press
mum is 50. The maximum is 400.
Select your month of birth.
Enter your height, then press BACK/PWR to close the setting change window. The
minimum is 10 and the max is 999.
Enter your day of birth. Press
Enter the year you were born. Press
Abbreviation
HR
SPD
CAD
SPC
PWR
Adjustment
to close the setting change window. The mini-
8
to close the setting change window
8
to close the setting change window.
8
26