Timex Global Trainer M229 User Manual page 27

Heart Rate Zone
Setting Group
Heart Rate Zone
Target Zone
Low
High
NOTE: If the Low value is set above the High value, the High value is automatically set to 5 beats higher than
the Low value. If the High value is set below the Low value, the Low value is automatically set to 5 beats lower
than the High value. If either value is set outside the acceptable range, the previous settings are retained.
Cadence Zone
Setting Group
Cadence Zone
Below
Above
Power Zone
Setting Group
Power Zone
Below
Above
Sensors
Use the Sensors menu to search for, pair, and manage ANT+™ sensor devices such as heart rate monitors,
cadence and speed sensors, and power meters. See pages ?? and ?? for information on pairing and using
specific sensors.
Select ON to alert you when your heart rate is outside the Low or High settings, or
OFF to disable the heart rate zone alert.
Select CUSTOM to enter Low and High values manually, or Zones 1 through 5 to
use high and low values based on your user info.
Enter the minimum heart rate threshold. If your heart rate goes below this thresh-
old, the alert sounds. Press
8
to 240.
Enter the maximum heart rate threshold. If your heart rate goes above this thresh-
old, the alert sounds. Press
8
to 240.
Select ON to alert you when your bike crank rpm is outside the Below or Above
settings, or OFF to disable the cadence zone alert.
Enter the minimum rpm threshold. If you go below this cadence, the alert sounds.
Press to close the setting change window. The range is 0 to 200.
8
Enter the maximum rpm threshold. If you go above this cadence, the alert
sounds. Press to close the setting change window. The range is 0 to 200.
8
Select ON to alert you when generating fewer or more watts than the Below or
Above settings, or OFF to disable the power zone alert.
Enter the minimum power threshold. If you generate less power than this, the
alert sounds. Press to close the setting change window. The range is 0 to 999.
8
Enter the maximum power threshold. If you generate more power than this, the
alert sounds. Press to close the setting change window. The range is 0 to 999
8
25
Adjustment
to close the setting change window. The range is 30
to close the setting change window. The range is 30
Adjustment
Adjustment