Timex Global Trainer M229 User Manual page 29

Watch
Adjust settings for the time of day function, including time zone, date format, and whether or not to adjust for
daylight savings time.
To Configure Watch Settings
1. Press MODE until CONFIGURE displays.
2. Press q to highlight WATCH, then press 8 .
3. Press p or q to highlight the setting to change, then press 8 to open the setting change window.
4. Press p or q to highlight a selection in the setting change window, then press 8 to confirm your selec-
tion.
Setting Group
Button Beep
Hourly Chime
Time Format
Time Zone
Daylight Saving
Date Format
Alarm
Set an alarm which will sound at the selected times and days. The alarm will sound even when the watch is
powered down, so long as the Power Off function is set to SHOW TIME.
When the alarm sounds, a message displays indicating the time and days the alarm is set to sound.
To Configure Alarm Settings
1. Press MODE until CONFIGURE displays.
2. Press q to highlight ALARM, then press 8 .
3. Press p or q to highlight the setting to change, then press 8 to open the setting change window.
4. Press p or q to highlight a selection in the setting change window, then press 8 to confirm your selection.
Setting Group
Alarm
Time
Select ON to enable a tone which sounds every time you press a button, or select
OFF to disable the tone.
Select ON to enable a tone which sounds on the hour, or select OFF to disable
the tone.
Select 12 HOUR or 24 HOUR. For example, 3:00pm will display as 3:00PM in 12-
hour format, and as 15:00 in 24-hour format.
Select your local time zone.
Select ON to use daylight savings time, or OFF to keep standard time
Select the date format to display. You can choose mm/dd/yyyy, dd.mm.yyyy, or
yyyy/mm/dd.
Select ON to sound an alarm at the selected frequency, or select OFF to disable
the alarm.
Enter the time at which the alarm will sound. Press
window
27
Adjustment
Adjustment
to close the setting change
8