Wireless User Isolation; L2Fw Wlan-Client-Isolation Enable - H3C WA Series Command Reference Manual
Wlan access points
Hide thumbs
Also See for WA Series:
- Fundamentals configuration manual (137 pages) ,
- Layer 2 command reference (133 pages) ,
- Configuration manual (84 pages)
Table of Contents
Advertisement
11
Wireless User Isolation
l2fw wlan-client-isolation enable
Syntax
l2fw wlan-client-isolation enable
undo l2fw wlan-client-isolation enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the l2fw wlan-client-isolation enable command to enable wireless user Layer 2 isolation.
Use the undo l2fw wlan-client-isolation enable command to disable wireless user Layer 2 isolation.
By default, wireless user Layer 2 isolation is enabled.
Examples
# Disable wireless user Layer 2 isolation.
<Sysname> system-view
[Sysname] undo l2fw wlan-client-isolation enable
% Info: wlan client isolation disabled.
11-1
Advertisement
Table of Contents
