H3C WA Series Command Reference Manual page 82

--------------------------------------------------------------------------
0011-95c3-9241 000f-e200-0500
0013-4695-16dd 000f-e200-0500
Table 10-1 display wlan client command output description.
MAC Address
BSSID
AID
State
PS Mode
QoS Mode
# Display the detail information of all the clients.
<Sysname> display wlan client verbose
Total Number of Clients
Total Number of Clients Connected : 1
--------------------------------------------------------------------------
MAC Address
AID
Radio Interface
SSID
BSSID
Port
VLAN
State
Power Save Mode
Wireless Mode
QoS Mode
Listen Interval (Beacon Interval) : 10
RSSI
SNR
Rx/Tx Rate
Client Type
Authentication Method
AKM Method
4-Way Handshake State
Group Key State
Encryption Cipher
Roam Status
Up Time (hh:mm:ss)
--------------------------------------------------------------------------
1
2
Field
: 1
Client Information
: 0014-6c91-9a14
: 251
: WLAN-Radio1/0/2
: nsw-nsw
: 000f-e2cc-2022
: WLAN-BSS1
: 1
: Running
: Sleep
: 11g
: WMM
: 25
: -NA-
: 48/54
: RSN
: Open System
: Dot1X
: PTKINITDONE
: IDLE
: CCMP
: Normal
: 00:05:15
Running Active
Running Active
MAC address of the client
ID of a BSS
Association ID of the client
State of the client such as Running
"B" denotes a backup client.
Client's power save mode such as Active or Sleep.
WMM indicates that the WMM function is
supported;
None indicates that the WMM function is not
supported.
WMM information negotiation is carried out between
an AP and a client that both support WMM.
10-7
WMM
None
Description