H3C WA Series Command Reference Manual page 32

View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display wlan rrm command to display basic RRM configuration information.
Examples
# Display RRM configuration information.
<Sysname> display wlan rrm
--------------------------------------------------------------------------
11a Configured Rates (Mbps)
Mandatory
Supported
Disabled
11b Configured Rates (Mbps)
Mandatory
Supported
Disabled
11g Configured Rates (Mbps)
Mandatory
Supported
Disabled
11g Protection
11h Configuration
Spectrum Management
Power Constraint (dBm)
Channel Set
Table 6-1 display wlan rrm command output description
Mandatory
Supported
Disabled
11g Protection
11h Configuration
Spectrum Management
Power Constraint (dBm)
RRM Configuration
: 6, 12, 24
: 9, 18, 36, 48, 54
: -NA-
: 1, 2
: 5.5, 11
: -NA-
: 1, 2, 5.5, 11
: 6, 9, 12, 18, 24, 36, 48, 54
: -NA-
: Enabled
: Disabled
: 0
: Non-dot11h
Field
Rates that an APs is required to support
Additional rates supported by the client or AP
Rates at which an AP does not transmit data
Enables 802.11g protection.
802.11h configuration
Spectrum management for all 802.11a radios, which
is set with command spectrum-management
enable.
Power constraint for all 802.11a radios, which is set
with command power-constraint.
6-2
Description