H3C WA Series Command Reference Manual page 54

CAC information :
Uplink CAC packets
Uplink CAC bytes
Downgrade packets
Downgrade bytes
AC
TID
PSB
Medium Time(ms)
Mean Data Rate(Kbps): 78.125
Create TS time
Update TS time
Uplink TS packets
Uplink TS bytes
Table 8-2 display wlan wmm client command output description
MAC address
SSID
QoS Mode
Max SP length
AC
State
Assoc State
Uplink CAC packets
Uplink CAC bytes
Downlink CAC packets
Downlink CAC bytes
Downgrade packets
Downgrade bytes
Discard packets
Discard bytes
Direction
User Priority
TID
PSB
Nominal MSDU Size(bytes)
: 0 Downlink CAC packets
: 0 Downlink CAC bytes
: 0 Discard packets
: 0 Discard bytes
: AC-VO User Priority
: 1 Direction
: 0 Surplus Bandwidth Allowance : 1.0000
: 39.108 Nominal MSDU Size(bytes)
Minimum PHY Rate(Mbps)
: 5s
: 5s
: 0 Downlink TS packets
: 0 Downlink TS bytes
Field
MAC address of a station
Service set ID (SSID)
QoS mode:
WMM indicates that QoS mode is enabled;
None indicates that QoS mode is not enabled.
Maximum service period
Access category
APSD attribute of an AC, which can be T, D, or L. T
indicates that the AC is trigger-enabled; D indicates
that the AC is delivery-enabled; T | D indicates that the
AC is both trigger-enabled and delivery-enabled; L
indicates that the AC is of legacy attributes.
APSD attributes of the ACs specified when a client
accesses the AP
Number of uplink CAC packets
Number of uplink CAC bytes
Number of downlink CAC packets
Number of downlink CAC bytes
Number of downgraded packets
Number of downgraded bytes
Number of dropped packets
Number of dropped bytes
Traffic direction
User priority
Traffic identifier
Power saving mode banner
Average MSDU size (in bytes)
8-5
: 0
: 0
: 0
: 0
: 7
: Bidirectional
: 1500
: 2.000
: 0
: 0
Description